How to Root Galaxy Note 10 1 N8000 on Android 4 1 2 XXCMF1 Jelly Bean Firmware

Samsung has delivered a new software update based on Android 4.1.2 Jelly Bean with build number N8000XXCMF1 for the European owners of Samsung Galaxy Note 10.1 model number GT-N8000.

Samsung Galaxy Note 10.1 N8000 users who have already updated their devices with Android 4.1.2 XXCMF1 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy Note 10.1 users to root their devices easily without depending on the firmware. It completely supports Android 4.1.2 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Note: Using this root increases your flash counter. The flash counter keeps track of how many custom firmwares you have flashed, as this voids warranty. Triangle Away can be used to reset the flash counter after installing CF-Auto-Root.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Driver for Samsung Galaxy Note 10.1 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Note 10.1 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The CF-Auto-Root file works only on Samsung Galaxy Note 10.1 N8000. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 10.1 by navigating to Settings >> About Phone.

Files Required
1. CF-Auto-Root for Galaxy Note 10.1 N8000 (CF-Auto-Root-p4noterf-p4noterfxx-gtn8000.zip)
2. Odin 3.07 (Mirror Link)

Steps to Root Galaxy Note 10.1 N8000 Running on Android 4.1.2 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using WinRAR/7-Zip/WinZip or any other extracting tool.
Step 2: Switch off the Galaxy Note 10.1. Then boot the device into Download Mode by pressing and holding Volume Down + Power buttons together until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer.
Step 4: Connect the Galaxy Note 10.1 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn yellow with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Step 5: In Odin, click the PDA button and select the CF-Auto-Root-p4noterf-p4noterfxx-gtn8000.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option in Odin is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy Note 10.1 N8000 running on Android 4.1.2 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developer original thread.

Read More..

INSTALL CWM on Galaxy Y Root Required

  Install Clockworkmod on Galaxy Y :               

Introduction :

Clockworkmod is a tool which is necessary for backing up your android smartphone.It is somewhat like  backing up your current settings , apps , and firmware which you could restore later..It is also necessary if you want to install custom ROMs on your phone.

ClockWorkMod Recovery, also known as CWM Recovery is a software or option used for replacing the default recovery console of Android smartphones or for rooting purpose. 

Steps to install CWM in Samsung galaxy y :

First Of all ensure that your phone is rooted and you have the super user access of your phone....
for the details of rooting follow this link

Now follow the below procedures ...

• Install the given CWM_PACKAGE file ......   Download link 1....  ---Link 2---- ---Link 3---- 
  +++++++LIKED THIS POST ++++++ CLICK HERE and SKIP AD TO SUPPORT
• Place the downloaded zip (link 2 contains piz format so rename it as .zip extension ) folder to your phones Sd Card ... (Remember put this to your root of sdcard ie  (sdcard / ) not in any folder 
• Turn Off Your Phone
• Press and Hold Home + Volume Up + Power key for few seconds until you see the Samsung Logo on the screen
• Now you will see the phone is in default recovery console. 
• Select the option ‘Install from SD Card’ using your Volume keys to scroll and press Home key to select. 
• Now select ClockWorkMod Recovery named (CWM_Package) and press home key to select. 
• Within 2 seconds your phone will be in ClockWorkMod Recovery.

Read More..

How to Root Galaxy S4 T Mobile SGH M919 on Android 4 3 Jelly Bean Firmware

The T-Mobile subscribers of the Samsung Galaxy S4 with model number SGH-M919 has started receiving the Android 4.3 Jelly Bean update. The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Samsung Galaxy S4 (T-Mobile) SGH-M919 users who have already updated their devices with Android 4.3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by Elite Recognized XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.3 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The CF-Auto-Root file works only on the T-Mobile version of Galaxy S4 (SGH-M919). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

Files Required
1. CF-Auto-Root (Mirror Link) for Galaxy S4 (T-Mobile) SGH-M919 (CF-Auto-Root-jfltetmo-jfltetmo-sghm919.zip)
2. Odin 3.07

Steps to Root Galaxy S4 (T-Mobile) SGH-M919 Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using WinRAR/7-Zip/WinZip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-jfltetmo-jfltetmo-sghm919.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 (T-Mobile) SGH-M919 running on Android 4.3 Jelly Bean is now rooted successfully. Open the app drawer of the phone and check for an app called SuperSU. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Note: Many Samsung devices store a flash counter that keeps track of how many times you have flashed custom firmwares to your device. Triangle Away can be used to reset the flash counter to zero.

How to Fix "Unfortunately, SuperSU has stopped"?
Step 1: Download and install the latest APK of SuperSU on your device.
Step 2: Open SuperSU app (update the binary if prompted) and allow it to disable KNOX.
Step 3: Reboot your device.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..