How to Root Galaxy Note 10 1 N8000 on Android 4 1 2 XXCMF1 Jelly Bean Firmware

Samsung has delivered a new software update based on Android 4.1.2 Jelly Bean with build number N8000XXCMF1 for the European owners of Samsung Galaxy Note 10.1 model number GT-N8000.

Samsung Galaxy Note 10.1 N8000 users who have already updated their devices with Android 4.1.2 XXCMF1 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy Note 10.1 users to root their devices easily without depending on the firmware. It completely supports Android 4.1.2 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Note: Using this root increases your flash counter. The flash counter keeps track of how many custom firmwares you have flashed, as this voids warranty. Triangle Away can be used to reset the flash counter after installing CF-Auto-Root.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Driver for Samsung Galaxy Note 10.1 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Note 10.1 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The CF-Auto-Root file works only on Samsung Galaxy Note 10.1 N8000. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 10.1 by navigating to Settings >> About Phone.

Files Required
1. CF-Auto-Root for Galaxy Note 10.1 N8000 (CF-Auto-Root-p4noterf-p4noterfxx-gtn8000.zip)
2. Odin 3.07 (Mirror Link)

Steps to Root Galaxy Note 10.1 N8000 Running on Android 4.1.2 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using WinRAR/7-Zip/WinZip or any other extracting tool.
Step 2: Switch off the Galaxy Note 10.1. Then boot the device into Download Mode by pressing and holding Volume Down + Power buttons together until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer.
Step 4: Connect the Galaxy Note 10.1 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn yellow with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Step 5: In Odin, click the PDA button and select the CF-Auto-Root-p4noterf-p4noterfxx-gtn8000.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option in Odin is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy Note 10.1 N8000 running on Android 4.1.2 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developer original thread.

Read More..

How to Update Galaxy Tab 3 Lite Wi Fi SM T110 with Android 4 2 2 XXUAND1 Jelly Bean Official Firmware

Samsung has rolled out another Android 4.2.2 Jelly Bean update for the Wi-Fi version of Galaxy Tab 3 Lite with model number SM-T110 in Southeast Asian countries. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: T110XXUAND1
CSC: T110OLBANB1
MODEM: T110XXUAND1
Version: Android 4.2.2
Build date: Apr 08, 2014
Regions: Thailand, Indonesia, Malaysia, Philippines, Singapore, Vietnam

Samsung Galaxy Tab 3 Lite (Wi-Fi) SM-T110 users who missed the OTA update notification or unable to access the update over Samsung KIES, can now download and install the same manually using our step-by-step guide.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Tab 3 Lite on the computer.
2. Enable USB Debugging Mode on your tablet by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the tablet is charged more than 80 percent.
5. The Android 4.2.2 XXUAND1 Jelly Bean firmware is compatible only with the Wi-Fi version of Galaxy Tab 3 Lite (SM-T110). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Tab 3 Lite by navigating to Settings >> About Phone.

Files Required
1. Android 4.2.2 XXUAND1 Jelly Bean Firmware (Mirror Link)
2. Odin 3.07

Steps to Update Galaxy Tab 3 Lite (Wi-Fi) SM-T110 with Android 4.2.2 XXUAND1 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Tab 3 Lite.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Tab 3 Lite to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Step 7: Select the following files in Odin from extracted T110XXUAND1 firmware folder:

• Click the PDA button and select the .tar.md5 file.
• Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
• Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
• Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process is completed, your device will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.

Samsung Galaxy Tab 3 Lite (Wi-Fi) SM-T110 should be now updated with the Android 4.2.2 XXUAND1 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Tab 3 Lite (Wi-Fi) SM-T110 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Read More..

How to Update Galaxy Grand Duos I9082 with Android 4 1 2 XXAMCE Jelly Bean Official Firmware

Samsung recently started rolling out its official Android 4.1.2 Jelly Bean update for the Galaxy Grand Duos GT-I9082 in several countries. The new official firmware is now available for download through Samsung KIES as well as Over-The-Air (OTA) update in Southeast Asia countries - Indonesia, Malaysia, Philippines, Singapore, Vietnam and Thailand.

Firmware details
PDA: I9082XXAMCE
CSC: I9082OLBAMC4
Version: Android 4.1.2
Built date: March, 2013
Regions: Indonesia, Malaysia, Philippines, Singapore, Vietnam, Thailand

The Galaxy Grand Duos users who missed the OTA update notification and those who are residing outside the supported countries can manually download and install the same using our step-by-step guide given below.

Pre-requisites
1. Install USB Driver for Samsung Galaxy Grand Duos on the computer.
2. Enable USB Debugging Mode.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Grand Duos should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The Android 4.1.2 XXAMCE Jelly Bean firmware is compatible only with Samsung Galaxy Grand Duos I9082 and installing this on any incorrect variant will brick the device. Therefore, verify the model number of the Galaxy Grand Duos by navigating to Settings>> About Phone.

File Required
1. Android 4.1.2 XXAMCE Jelly Bean Firmware
2. Odin 3.07

Steps to Update Galaxy Grand Duos I9082 on Android 4.1.2 XXAMCE Jelly Bean Firmware
Step 1: Extract Firmware zip file that you downloaded already from above link, you will get a .tar.md5 file and some other files.
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Power off your phone. Wait 5-6 seconds for vibration to confirm complete switch off.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Grand Duos to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn yellow with the COM port number. Additionally, the successful connected will be indicated by a message saying Added. If Odin fails to detect the device then re-install USB driver.
Step 7: Choose the following files in Odin from extracted I9082XXAMCE firmware folder by using respective checkboxes:

• Select the PDA checkbox, and choose the file named .tar or .md5.
• Click the Phone checkbox, and choose the file with modem in its name (ignore if there is no such file)
• Click the CSC checkbox, and select the file with csc in its name (ignore if such file is missing)
• Choose the PIT checkbox, and choose the .pit file. Use only the file obtained during extracting in step 1 above, otherwise ignore it.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the START button to begin the flashing process.
Step 10: Once flashing completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy Grand Duos I9082 should be now updated with official Android 4.1.2 XXAMCE Jelly Bean. Head over to Settings>> About Phone to verify the software version running on the device.

Note: If Galaxy Grand Duos I9082 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Read More..

Upgrade Os Jelly Bean 4 1 2 for Samsung Galaxy S Advance GT i9070

Samsung Galaxy S Advance GT-i9070 aslinya di bekali OS Android 2.3.7, tapi anda bisa meng-upgrade-nya mmenjadi Jelly Bean atau Android 4.1.2 dengan mengikuti panduan yang saya berikan nanti. Jika anda sudah terbiasa melakukan rooting/flashing perangkat Android dan biasa menggunakan Odin, Anda bisa dapat meng-upgrade ke 4.1.2 langsung secara manual. Yang Anda perlukan adalah mendownload stock ROM aslinya dan mem-flashing melalui tool Odin. Jika Anda tidak/belum pernah melakukan upgrade (rooting/flashing) sebaiknya jangan lakukan, karena beresiko rusaknya perangkat anda jika anda tidak hati-hati.

Disclaimer: Panduan ini hanya untuk para ahli, saya tidak melarang yang belum ahli untuk mencoba. Tetapi dengan menggunakan panduan ini segala resiko anda tanggung sendiri! Kami tidak bertanggung jawab jika terjadi sesuatu ke perangkat Anda.

Untuk upgrade Samsung Galaxy S Advance GT-i9070, anda bisa download GT-I9070_SER_I9070XXLPY_I9070SERLPY_I9070XXLPY terlebih dulu di sini atau mirror filenya di hotfile via adf.ly di sini. Sekarang ini masih dalam Bahasa Rusia :)

PENTING
- Back up semua data penting yang tersimpan dari telepon.
- Sepenuhnya mengisi ulang baterai telepon.
- Gunakan komputer Windows Based atau laptop, Odin tidak akan bekerja pada MAC dan Linux OS.
- Nonaktifkan Kies pada system tray, karena Kies akan memblokir Odin.
- Siapkan kabel USB untuk ponsel Anda

Cara Install manual Android 4.1.2 di Samsung Galaxy S Advance I9070 :

1. Download dari 4shared via adf.ly Odin3 v1.87 link berikut atau versi varuOdin3 v3.07 dari hotfile via adf.ly di sini
2. Matikan HH/Kies
3. Colokkan USB ke Laptop / PC
4. Buka Aplikasi Odin3 yang sudah anda download tadi
5. Masukan lokasi file .md5 (file Jellybean yg di download tadi) dengan klik "PDA" (jika file firmware dalam zip file, ekstrak terlebih dahulu) dan arahkan ke lokasi file .md5

7. Pastikan "JANGAN CENTANG" yang "Re-Partition" kotak ceckbox.
6. Atur ke Mode Download
8. Hubungkan ke komputer atau laptop melalui kabel USB
9. Tekan tombol "START" untuk memulai instalasi.
10. Tunggu kata "FINISHED" muncul.
11. Lepaskan ponsel dari komputer, dan lakukan full reboot.

Dan Samsung Galaxy S Advance anda sudah menjadi Jelly Bean.

Sekedar informasi saja, Firmware ini terasa halus dan tampilannya juga cukup oke. Ada Touchwiz Nature UX dan beberapa aplikasi tambahan. Saya belum tahu dengan jelas apakah ada bug dan masalah lain seperti kinerja baterainya bagaimana, karena firmware ini masih baru.

Read More..

How to Update Galaxy S4 Canadian SGH M919V with Android 4 4 2 VLUFNB5 KitKat Official Firmware

Samsung has begun rolling out the Android 4.4.2 KitKat update for the Canadian version of Galaxy S4 with model number SGH-M919V. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: M919VVLUFNB5
CSC: M919VYVLFNB5
MODEM: M919VVLUFNB5
Version: Android 4.4.2
Build date: Feb 28, 2014
Regions: Canada
Carriers: Eastlink, Mobilicity, Videotron, Wind Mobile

Samsung Galaxy S4 (Canadian) SGH-M919V users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The Android 4.4.2 VLUFNB5 KitKat firmware is compatible only with the Canadian version of Samsung Galaxy S4 (SGH-I337M). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

Files Required
1. Android 4.4.2 VLUFNB5 KitKat Firmware

• Eastlink (Mirror Link)
• Mobilicity (Mirror Link)
• Videotron (Mirror Link)
• Wind Mobile (Mirror Link)

2. Odin 3.07

Steps to Update Galaxy S4 (Canadian) SGH-M919V with Android 4.4.2 VLUFNB5 KitKat Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy S4.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Step 7: Select the following files in Odin from extracted M919VYVLFNB5 firmware folder:

• Click the PDA button and select the .tar.md5 file.
• Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
• Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
• Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.

Samsung Galaxy S4 (Canadian) SGH-M919V should be now updated with Android 4.4.2 VLUFNB5 KitKat official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy S4 (Canadian) SGH-M919V stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Read More..

How to Update Galaxy S4 I9505 with Android 4 2 2 XXUBMGA Jelly Bean Official Firmware

Samsung recently released a new Android 4.2.2 Jelly Bean update with base firmware XXUBMGA for the owners of Samsung Galaxy S4 (GT-I9505) in Germany, Spain, and Nordic countries. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: I9505XXUBMGA
CSC: I9505OXABMGA
MODEM: I9505XXUBMGA
Version: Android 4.2.2
Built date: Jul 11, 2013
Regions: Germany, Spain, Nordic countries

Samsung Galaxy S4 I9505 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S4 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The Android 4.2.2 XXUBMGA Jelly Bean firmware is compatible only with Samsung Galaxy S4 I9505. Applying these to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. Android 4.2.2 XXUBMGA Jelly Bean Firmware for Samsung Galaxy S4 I9505
2. Odin 3.07

Steps to Update Galaxy S4 I9505 with Android 4.2.2 XXUBMGA Jelly Bean Firmware
Step 1: Extract Firmware zip file that you downloaded already from above link using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files.
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Power off your phone. Wait 5-6 seconds for vibration to confirm complete switch off.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.
Step 7: Choose the following files in Odin from extracted I9505XXUBMGA firmware folder by using respective checkboxes:

• Select the PDA checkbox, and choose the file named .tar or .md5.
• Click the Phone checkbox, and choose the file with modem in its name (ignore if there is no such file)
• Click the CSC checkbox, and select the file with csc in its name (ignore if such file is missing)
• Choose the PIT checkbox, and choose the .pit file. Use only the file obtained during extracting in step 1 above, otherwise ignore it.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the START button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 I9505 should be now updated with official Android 4.2.2 XXUBMGA Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy S4 I9505 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Read More..

How to Root Galaxy S4 T Mobile SGH M919 on Android 4 3 Jelly Bean Firmware

The T-Mobile subscribers of the Samsung Galaxy S4 with model number SGH-M919 has started receiving the Android 4.3 Jelly Bean update. The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Samsung Galaxy S4 (T-Mobile) SGH-M919 users who have already updated their devices with Android 4.3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by Elite Recognized XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.3 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The CF-Auto-Root file works only on the T-Mobile version of Galaxy S4 (SGH-M919). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

Files Required
1. CF-Auto-Root (Mirror Link) for Galaxy S4 (T-Mobile) SGH-M919 (CF-Auto-Root-jfltetmo-jfltetmo-sghm919.zip)
2. Odin 3.07

Steps to Root Galaxy S4 (T-Mobile) SGH-M919 Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using WinRAR/7-Zip/WinZip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-jfltetmo-jfltetmo-sghm919.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 (T-Mobile) SGH-M919 running on Android 4.3 Jelly Bean is now rooted successfully. Open the app drawer of the phone and check for an app called SuperSU. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Note: Many Samsung devices store a flash counter that keeps track of how many times you have flashed custom firmwares to your device. Triangle Away can be used to reset the flash counter to zero.

How to Fix "Unfortunately, SuperSU has stopped"?
Step 1: Download and install the latest APK of SuperSU on your device.
Step 2: Open SuperSU app (update the binary if prompted) and allow it to disable KNOX.
Step 3: Reboot your device.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

How to Update Galaxy Note 10 1 N8000 with Android 4 1 2 UBCML2 Jelly Bean Official Firmware

Samsung has rolled out another Android 4.1.2 Jelly Bean update with firmware build number N8000XXCMI2 for the Brazilian owners of the Galaxy Note 10.1 (GT-N8000). The new official update is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: N8000UBCML2
CSC: N8000ZTOCML3
MODEM: N8000UBLL2
Version: Android 4.1.2
Build date: Dec 16, 2013
Regions: Brazil

Samsung Galaxy Note 10.1 N8000 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Note 10.1 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Note 10.1 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.1.2 UBCML2 Jelly Bean firmware is compatible only with the 3G + WiFi version of Samsung Galaxy Note 10.1 with model number GT-N8000. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 10.1 by navigating to Settings >> About Phone.

Files Required
1. Android 4.1.2 UBCML2 Jelly Bean Firmware (Mirror Link) for Galaxy Note 10.1 N8000
2. Odin 3.07 (Mirror Link)

Steps to Update Galaxy Note 10.1 N8000 with Android 4.1.2 UBCML2 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Note 10.1.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Note 10.1 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted N8000UBCML2 firmware folder:

• Click the PDA button and select the .tar.md5 file.
• Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
• Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
• Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.

Samsung Galaxy Note 10.1 N8000 should be now updated with official Android 4.1.2 UBCML2 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Note 10.1 N8000 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Read More..

How to Update Galaxy Grand Duos I9082 with Android 4 2 2 XXUBMHD Jelly Bean Official Firmware

Samsung Galaxy Grand Duos (GT-I9082) owners in India, Nepal, Sri Lanka, and Bangladesh recently received its official Android 4.2.2 Jelly Bean update with firmware build number I9082XXUBMHD. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: I9082XXUBMHD
CSC: I9082ODDBMH3
MODEM: I9082DDUBMH2
Version: Android 4.2.2
Build date: Aug 30, 2013
Regions: India, Nepal, Sri Lanka, Bangladesh

This update bring a host of new features such as lockscreen widgets, dedicated toggles menu in the status bar, improved task switching, Daydream screensaver mode, and performance enhancements. It also integrates new widgets, homescreen and more features from the Galaxy S4.

Samsung Galaxy Grand Duos I9082 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Grand Duos on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Grand Duos should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.2.2 XXUBMHD Jelly Bean firmware is compatible only with Samsung Galaxy Grand Duos I9082. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Grand Duos by navigating to Settings >> About Phone.

Files Required
1. Android 4.2.2 XXUBMHD Jelly Bean Firmware (Mirror Link)
2. Odin 3.07 (Mirror Link)

Steps to Update Galaxy Grand Duos I9082 with Android 4.2.2 XXUBMHD Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Grand Duos.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Grand Duos to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Choose the following files in Odin from extracted I9082XXUBMHD firmware folder by using respective checkboxes:

• Select the PDA checkbox, and choose the file named .tar or .md5.
• Click the Phone checkbox, and choose the file with modem in its name (ignore if there is no such file)
• Click the CSC checkbox, and select the file with csc in its name (ignore if such file is missing)
• Choose the PIT checkbox, and choose the .pit file. Use only the file obtained during extracting in step 1 above, otherwise ignore it.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy Grand Duos I9082 should be now updated with official Android 4.2.2 XXUBMHD Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Grand Duos I9082 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Read More..

How to Update Galaxy Star Pro S7262 with Android 4 1 2 XXUANC1 Jelly Bean Official Firmware

Samsung has rolled out the latest Android 4.1.2 Jelly Bean update for the Galaxy Star Pro with dual SIM card slot (GT-S7262). The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: S7262XXUANC1
CSC: S7262ODDANA1
MODEM: S7262XXUAMK2
Version: Android 4.1.2
Build date: Mar 04, 2013
Regions: India, Bangladesh, Nepal, Sri Lanka

Samsung Galaxy Star Pro S7262 users who missed the OTA update notification or unable to access the update over Samsung KIES, can now download and install the same manually using our step-by-step guide.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Star Pro on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The Android 4.1.2 XXUANC1 Jelly Bean firmware is compatible only with the Galaxy Star Pro DUOS (GT-S7262). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Star Pro by navigating to Settings >> About Phone.

Files Required
1. Android 4.1.2 XXUANC1 Jelly Bean Firmware (Mirror Link) for Galaxy Star Pro S7262
2. Odin 3.07

Steps to Update Galaxy Star Pro S7262 with Android 4.1.2 XXUANC1 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Star Pro.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Star Pro to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Step 7: Select the following files in Odin from extracted S7262XXUANC1 firmware folder:

• Click the PDA button and select the .tar.md5 file.
• Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
• Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
• Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Star Pro S7262 should be now updated with Android 4.1.2 XXUANC1 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Star Pro S7262 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Read More..

Facebook 4 4 1 Download Facebook 4 4 1 Mobile App Free Facebook 4 4 1 Software free Download

 Image Source : www.facebook.com

File format : jar, apk, ipa, jad, java, jar, sdk, sis.

Tags :Facebook 4.4.1 download, download Facebook 4.4.1, Facebook 4.4.1 free download, Facebook app for Nokia, Samsung, Sony, ipod,iphone, ios,windows 8, Blackberry,para os.facebook version descargar.jar, apk, ipa, jad, java, jar, sdk, sis, handler facebook, facebook for android.

Advertisement

  

Read More..

Mozilla Releases New Firefox 4 Beta For Mobile Devices

Developers of Mozilla Firefox has released another test version 4 - this time for mobile devices.

You can get Mozilla Firefox 4 Beta from the Android Market to test on your Google Android device or go here to get Firefox 4 Beta on your Nokia Maemo device. This release is the fastest performing Firefox 4 Beta for mobile yet.

An updated version of Firefox 4 beta Google Android and Nokia Maemo device, which was released today, claimed faster than Android native browser.

Meanwhile, the desktop is working hard to beta-beta-11 and possibly 12 to the planned launch in late February. In todays meetings, the team reported significant progress reducing the number of errors and blocks, but could not say when the beta-11 is ready.

Read More..

Set Free The Devil Inside Devil May Cry 4 Latest Games

Plug in your gamepad and prepare yourself for another demon slaying experience.

This version of Devil May Cry is very interesting because, theres a new character with some terrific new moves, he is no other than "Nero". Devil May Cry 4 has beautiful visuals and incredible cut scenes that will definitely amaze the players. Boss characters are designed very well and challenging to fight. There are a couple of fun modes that are exclusive for the PC version only.

The Bad side is you need a gamepad. Environments and boss fights are repeated if you cant defeat the boss character or complete the level. And puzzles and platforming arent much fun. If you play Devil May Cry 4 on your PC, you should expect all of the same visceral carnage featured in the console versions, but you really need a gamepad. If youre a eager for punishment, you can try using the games keyboard control scheme, but its awkward and frustrating. However, assuming that you have a decent controller, youll find that this excellent sequel is Capcoms finest PC release in years.

Its a challenging experience, though its smoother difficulty curve makes it far more accessible than Devil May Cry 3. In this scenario, youre given an excellent number of gameplay choices that help you finish the challenge to your preferences. You can initially choose one of two difficulties and you can even choose whether you want the game to perform some combos for you automatically. No, its not awkward to find Devil May Cry 4 to be excessively tough on your first play-through, although it is no walk in the park, either. Nevertheless, it is generally excessive, and that isnt a bad thing. Stylish action, terrific boss fights, and beautiful, melodramatic cut scenes will inspire you to push forward, and they serve as an appropriate reward for a well-played sequence of demon slaying.

Dantes back, and hes badder than ever. It isnt surprising that a game featuring the charmingly insane Dante would be so over the top. Though the series famed antihero is not the real star this time around. Dont worry; youll still get to play as Dante, and he brings with him a good selection of weapons and fighting styles, just as Devil May Cry fans would expect. But youll spend the majority of the game as newcomer Nero, who has a selection of impressive and elegant moves of his own. Nero is an excellent character, capable of delivering a few wisecracks, a brooding glance, and a heartfelt plea of love to his beloved Kyrie in a few moments time. Hes clearly cut from the same cloth as Dante, and its a bit disappointing that the game doesnt explore this connection in more detail. Regardless, youll want to follow Neros exploits as he struggles to learn the truth about his own religious organization, The Order of the Sword, and Dantes apparent murder of its leader.

Neros claim to fame is his demonic arm, better known as the devil bringer. With it, you can grab on to distant enemies and pull them in, pick them up, and slam them around for some excellent combos, plus deliver a few other surprises. These mechanics are easy to pull off, and they represent a general shift from the defensive gameplay of Devil May Cry 3 to a more aggressive approach. As you play, you can pull off some incredibly satisfying moves, both in the air and on the ground, and the most violent of these are accompanied by slick, bloody animations and appropriately gory-sounding thwacks and slashes. Timing these various moves can be tricky, but like in the previous games, eventually the subtleties of your combos will click, and in time youll be pulling enemies toward you, slashing them into bite-size pieces, and smashing them into one another with glee. Find out how awesome Devil May Cry 4 to play with.
For latest games and latest game reviews, feel free to visit my blog..Thanks!^^

Read More..

Windows Android 4 0 Setup

Windows Android 4 0 Setup

Type : torre

Size : 48 KB

Artis :
Android Download

Rating :

Search Result

Android SDK | Android Developers
Download the official Android SDK to develop apps for Android-powered devices.

Android 4 | VPN | Unblock websites. Improve privacy.
Android 4.0.3 or higher. Your phone needs to be secured with a pattern, ... Android will refuse to setup the VPN without one. An Android 4 compatible server.

Android 4.0: Installing and Running Ice Cream Sandwich (ICS) in ...
This article will explain how to setup the Android SDK to run the latest Android version 4.0, Ice Cream Sandwich, in an emulator and get a first hand glimpse of the ...

Android Development Environment Setup Instructions - Marakana
SDK Platform Android 4.0.3, API 15, revision 3; ... revision 4 (Windows-only) Android NDK r7b; Cygwin 1.7.7-1 ... please follow the manual setup instructions, ...

List of trusted certificates in Android 4.0, iOS 5 and Windows ...
Trusted CA certificates can be used to perform Man-in-the-Middle (MITM) attacks (eavesdropping/modifying traffic) on SSL/TLS encrypted sessions.

Installation Instructions for Intel® Android* USB Driver | Intel ...
Intel® Developer Zone logo · erichais picture · Tao Peng (Intel)s picture · mcgama88s picture · s picture

Setup Hotmail on android 4.0.2 icecream sandwich? - Yahoo!7 Answers
i have setup my hotmail account on my android 4.0.2 however i cannot view the subfolders of the inbox. i have tried almost everything to view them however ...

TI-Android-ICS-4.0.3-DevKit-3.0.0 DevelopersGuide - Texas ...
TI Android ICS-4.0.3-DevKit-3.0.0 Developer Guide . Developer Guide - March 30, 2012. About this manual . The objective of this document is to guide Android ...

Collins Upstream, Install Android 4.0 Using VirtualBox on Windows ...
Install Android 4.0 Using VirtualBox on Windows, ... After clicking Next the setup will ask you for a start-up hard disk. Select Create new hard disk.

Install And Run Android 4.0 On Mac, Windows PC Or Linux Using ...
Heres some easy steps on how to install Android 4.0 ICS on your Mac OS X, Windows 7 PC and Linux (Ubuntu) ... instead of running or dual booting setup, ...

Description

Heres some easy steps on how to install Android 4.0 ICS on your Mac OS X, Windows 7 PC and Linux (Ubuntu) ... instead of running or dual booting setup, ...,Install Android 4.0 Using VirtualBox on Windows, ... After clicking Next the setup will ask you for a start-up hard disk. Select Create new hard disk.,TI Android ICS-4.0.3-DevKit-3.0.0 Developer Guide . Developer Guide - March 30, 2012. About this manual . The objective of this document is to guide Android ...,i have setup my hotmail account on my android 4.0.2 however i cannot view the subfolders of the inbox. i have tried almost everything to view them however ...,Intel® Developer Zone logo · erichais picture · Tao Peng (Intel)s picture · mcgama88s picture · s picture,Trusted CA certificates can be used to perform Man-in-the-Middle (MITM) attacks (eavesdropping/modifying traffic) on SSL/TLS encrypted sessions.,SDK Platform Android 4.0.3, API 15, revision 3; ... revision 4 (Windows-only) Android NDK r7b; Cygwin 1.7.7-1 ... please follow the manual setup instructions, ...,This article will explain how to setup the Android SDK to run the latest Android version 4.0, Ice Cream Sandwich, in an emulator and get a first hand glimpse of the ...,Android 4.0.3 or higher. Your phone needs to be secured with a pattern, ... Android will refuse to setup the VPN without one. An Android 4 compatible server.,Download the official Android SDK to develop apps for Android-powered devices.

Similar Post

• Gaz Touch Tools 2 0 Suite
• android softwares com X plore File Manager 3 02
• Cool Tool v4 2 AdFree Released by HPR
• w4 2 Android
• Snack Pack v1 4 3
• aut0 3 2 Android
• Android download free online
• znpxx Android App Directory Volume 01 2013 True PDF
• Simpsons All Holidays
• AnDrOiD Apps Pack

Read More..